> And I've managed to get WWENG1.SYS booted into this thing but it won't give > me a prompt on port 0 (I get all the status messages up to "no TCP/IP > address and SNMP isn't starting" and then nada, zip. It sounds like the unit is configured for either a different baud rate or port 0 is not configured for access. Try a different baud rate or port. Also, if you have a system connected to the network with LAT support, see if the unit is announcing itself. If it is, login via LAT. > Does the 1MB image have a command interpreter in it? If not do I have to > use something else to configure it? Sorry for all the questions but the > DNPG site is not useful in this regard. Yes. The biggest difference between WWENG1 and WWENG2 is TCP/IP (WWENG2 supports TCP/IP, WWENG1 doesn't). -- Eric Dittman mailto:dittman@dittman.net?subject=Re: DECServer again
This archive was generated by hypermail 2b30 : 09/01/01-05:30:24 AM Z CDT